Your shopping cart is empty!
/IMG_5721_2-55x55w.jpg)
Vertical Mold Making Machine; 30" x 20" x 20" (762 x 508 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, 24+1 side-mount tool changer, 710 ipm (18.0 m/min) rapids, automatic chip auger, remote jog handle, automatic air gun, high-speed machining,
Ethernet interface, macros, coordinate rotation & scaling, programmable coolant nozzle, power failure detection module, 750 MB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system.
| VM-2 | ||
| TRAVELS | S.A.E. | METRIC |
|---|---|---|
| X Axis | 30 " | 762 mm |
| Y Axis | 20 " | 508 mm |
| Z Axis | 20 " | 508 mm |
| Spindle Nose to Table (~ max) | 24 " | 610 mm |
| Spindle Nose to Table (~ min) | 4 " | 102 mm |
| TABLE | S.A.E. | METRIC |
| Length | 36 " | 914 mm |
| Width | 18 " | 457 mm |
| T-Slot Width | 5/8 " | 16 mm |
| T-Slot Center Distance | 4.375 " | 111 mm |
| Number of Std T-Slots | 7 in Y, 3 in X | 7 in Y, 3 in X |
| Max Weight on Table (evenly distributed) | 3000 lb | 1361 kg |
| SPINDLE | S.A.E. | METRIC |
| Max Rating | 30 hp | 22.4 kW |
| Max Speed | 12000 rpm | 12000 rpm |
| Max Torque | 90 ft-lb @ 2000 rpm | 122 Nm @ 2000 rpm |
| Drive System | Inline Direct-Drive | Inline Direct-Drive |
| Taper | CT or BT 40 | CT or BT 40 |
| SPINDLE (OPT) | S.A.E. | METRIC |
| Max Rating | 30 hp | 22.4 kW |
| Max Speed | 15000 rpm | 15000 rpm |
| Max Torque | 90 ft-lb @ 2000 rpm | 122 Nm @ 2000 rpm |
| Drive System | Inline Direct-Drive | Inline Direct-Drive |
| Taper | CT or BT 40 | CT or BT 40 |
| FEEDRATES | S.A.E. | METRIC |
| Rapids on X | 710 in/min | 18.0 m/min |
| Rapids on Y | 710 in/min | 18.0 m/min |
| Rapids on Z | 710 in/min | 18.0 m/min |
| Max Cutting | 500 in/min | 12.7 m/min |
| AXIS MOTORS | S.A.E. | METRIC |
| Max Thrust X | 3400 lb | 15124 N |
| Max Thrust Y | 3400 lb | 15124 N |
| Max Thrust Z | 5600 lb | 24910 N |
| TOOL CHANGER | S.A.E. | METRIC |
| Type | SMTC | SMTC |
| Capacity | 24+1 | 24+1 |
| Max Tool Diameter (adjacent empty) | 5.0 " | 127 mm |
| Max Tool Diameter (full) | 3.0 " | 76 mm |
| Max Tool Length (from gage line) | 11 " | 279 mm |
| Max Tool Weight | 12 lb | 5.4 kg |
| Tool-to-Tool (avg) | 2.8 sec | 2.8 sec |
| Chip-to-Chip (avg) | 3.6 sec | 3.6 sec |
| GENERAL | S.A.E. | METRIC |
| Air Required | 4 scfm, 100 psi | 113 L/min, 6.9 bar |
| Coolant Capacity | 55 gal | 208 L |
Cookie PolicyThis site uses cookies and third-party cookies to provide you with a better experience and service. When navigating or using our services, you agree to our use of them. You can change your cookie settings at any time. |
|