HAAS UMC750
5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750 has an integrated dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +110 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity.
| TRAVELS |
S.A.E |
METRIC |
| X Axis |
30.0 in |
762 mm |
| Y Axis |
20.0 in |
508 mm |
| Z Axis |
20.0 in |
508 mm |
| Spindle Nose to Platter (~ max) |
24.0 in |
610 mm |
| Spindle Nose to Platter (~ min) |
4.0 in |
102 mm |
| SPINDLE |
S.A.E |
METRIC |
| Max Rating |
30.0 hp |
22.4 kW |
| Max Speed |
8100 rpm |
8100 rpm |
| Max Torque |
90 ft-lbf @ 2000 rpm |
122 Nm @ 2000 rpm |
| Drive System |
Inline Direct-Drive |
Inline Direct-Drive |
| Taper |
CT or BT 40 |
CT or BT 40 |
| Bearing Lubrication |
Air / Oil Injection |
Air / Oil Injection |
| Cooling |
Air Cooled |
Air Cooled |
| B AXIS – TILT |
S.A.E |
METRIC |
| Travel |
110 ° to 35- ° |
110 ° to 35- ° |
| Max Speed |
50 °/sec |
50 °/sec |
| Max Torque |
400 ft-lbf |
542 Nm |
| Brake Torque |
1800 ft-lbf |
2440 Nm |
| C AXIS – ROTATION |
S.A.E |
METRIC |
| Travel |
360 ° |
360 ° |
| Max Torque |
300 ft-lbf |
407 Nm |
| Max Part Swing |
27.0 in |
686 mm |
| Brake Torque |
500 ft-lbf |
678 Nm |
| Max Speed |
50 °/sec |
50 °/sec |
| PLATTER |
S.A.E |
METRIC |
| Platter Diameter |
19.70 in |
500 mm |
| Max Weight on Platter |
660 lb |
300.0 kg |
| T-Slot Width |
0.630 in |
16 mm |
| T-Slot Center Distance |
2.48 in |
63 mm |
| Number of Std T-Slots |
7 |
7 |
| FEEDRATES |
S.A.E |
METRIC |
| Max Cutting |
650 ipm |
16.5 m/min |
| Rapids on X |
1200 ipm |
30.5 m/min |
| Rapids on Y |
1200 ipm |
30.5 m/min |
| Rapids on Z |
1200 ipm |
30.5 m/min |
| AXIS MOTORS |
S.A.E |
METRIC |
| Max Thrust X |
2750 lbf |
12233 N |
| Max Thrust Y |
2750 lbf |
12233 N |
| Max Thrust Z |
3400 lbf |
15124 N |
| TOOL CHANGER |
S.A.E |
METRIC |
| Type |
SMTC |
SMTC |
| Capacity |
40+1 |
40+1 |
| Max Tool Diameter (full) |
3.0 in |
76 mm |
| Max Tool Diameter (adjacent empty) |
5.0 in |
127 mm |
| Max Tool Length (from gage line) |
12 in |
305 mm |
| Max Tool Weight |
12 lb |
5.4 kg |
| Tool-to-Tool (avg) |
2.8 s |
2.8 s |
| Chip-to-Chip (avg) |
3.6 s |
3.6 s |
| GENERAL |
S.A.E |
METRIC |
| Coolant Capacity |
75 gal |
284 L |
| AIR REQUIREMENTS |
S.A.E |
METRIC |
| Air Required |
4 scfm @ 100 psi |
113 L/min @ 6.9 bar |
| Inline Air Hose |
3/8 in |
3/8 in |
| Coupler (Air) |
3/8 in |
3/8 in |
| Air Pressure Min |
80 psi |
5.5 bar |
| DIMENSIONS - SHIPPING |
S.A.E |
METRIC |
| Domestic Pallet |
160 in x 96 in x 110 in |
407 cm x 244 cm x 280 cm |
| Export Pallet |
157 in x 92 in x 101 in |
399 cm x 234 cm x 257 cm |
| Weight |
19100 lb |
8664.0 kg |
| ELECTRICAL SPECIFICATION |
S.A.E |
METRIC |
| Spindle Speed |
8100 rpm |
8100 rpm |
| Drive System |
Inline Direct-Drive |
Inline Direct-Drive |
| Spindle Power |
30.0 hp |
22.4 kW |
| Input AC Voltage (3 Phase) - Low |
220 VAC |
220 VAC |
| Full Load Amps (3 Phase) - Low |
70 A |
70 A |
| Input AC Voltage (3 Phase) - High |
440 VAC |
440 VAC |
| Full Load Amps (3 Phase) - High |
35 A |
35 A |
